JY-A20 module fine filtration separation system
This model is a modular design product. Customers can customize this product according to different flow requirements. It adopts Jingyuan’s advanced membrane filter material to balance the oil flow and filtering effect, allowing the maximum flow to effectively filter the petroleum or mineral oil products and at the same time, Removal of water, impurities, improvement the product quality, clarification and filtration of visible particles. And it can implement cleaning and back washing operations.
Technical specifications:
Model: JY-A20
Flow rate: 1～25m³/h (for different oil products, customized on demand)
Filtration accuracy: 2~25μm
Filter material: Jingyuan polymer membrane material
Working pressure: 0.2～0.35Mpa
Motor power: 4.0KW, 380V
Pump group: centrifugal pump/gear pump
Pre-filter: Y
Oil inlet and outlet pipe diameter: DN80
Applicable oil: petroleum or mineral base oil, lubricating oil, diesel
Size: 2150×1250×2030mm
China Oil Purifier Manufacturer-jingyuan®
- Oil Purification Systems
- lube oil filtration
- Lubrication Oil Filters
- Lube Oil Filter Cart
- Hydraulic & Lubrication Oil Filters
- Lube Oil Treatment System
- Hydraulic Oil Filtration Machine
- Gear Oil Filtration Machine
- Portable Oil Purifier Cart
- Industrial Filtration Equipment
- Fuel Polishing and Filtration
In any case, the working medium should enter the system through a fine filter
Benefits :
- Prevents trouble to the hydraulic equipments
- Improves machine reliability and productivity
- Longer life of all hydraulic components, pumps, servo-valves and other equipment
- Very important reduction of oil consumption and the resulting waste oil
- Inline filter life extended
The necessity of oil filtration
Solid particle contaminants are the most common factor leading to failure and shutdown of hydraulic and lubrication systems, so industrial oil must be filtered and purified before being injected into the system. The pollution degree of unpurified new oil often exceeds the requirements of actual hydraulic system oil regulations. Since new oil has a high initial pollution level, most new oil (even if it is just extracted from an oil tank) is not suitable for direct use. There are many reasons for the pollution of new oil. Various pollutants, no matter particles or moisture, may be mixed into the new oil during processing, mixing and storage.
For purchasing inquiries, please call: +86 (24)86530244 E-mail:cindy@jingyuan.hk